Buy Innosilicon A10 485 MH Now

Buy Innosilicon A10 485MH Now

The Model A10 ETHMaster (485Mh) from Innosilicon mining EtHash4G algorithm with a maximum hashrate of 485Mh/s for a power consumption of 850W.

Innosilicon A10 ETHMaster (485Mh)
The Innosilicon A10 ETHMaster (485Mh), also known as A10 ETHKing, is an Ethash algorithm mining equipment. It can mine Ethereum(ETH). It has a maximum hash rate of 485Mh and a power consumption of 850W. This maximum hash rate of 485Mh contributes to the high profitability of the miner.

Compared to other mining devices, the Innosilicon A10 ETHmaster (485Mh) has a higher hash rate that contributes to the device’s high profitability. The device has a noise level of 75db. This high noise level comes as a result of the high power consumption and the hash rate. The Innosilicon A10 ETHMaster (485Mh) also comes with two fans to keep the device’s temperature in check.

The temperature range is between 0 – 40 degrees celsius and works over an Ethernet connection. It is produced and sold by the company Innosilicon, and they have advised that the PRO version is used instead of this version because there is not enough RAM to mine ETH.
It comes in a weight of 5400g. This particular mining device was released in September 2018.

Noise Level of Innosilicon A10 ETHMaster (485Mh) Buy Innosilicon A10 485MH Now
The Noise level is regarded to be higher than most miners but justifiable with its profitability. The noise level for this miner can result in noise pollution, which is one of the major reasons why miners who mine from home consider it before buying. The Noise level shows that the mining device can be noisy and, as such that the device cannot be set up in a residential environment.

Power Consumption of Innosilicon A10 ETHMaster (485Mh)
The Innosilicon A10 ETHMaster (485Mh) is 850W, and it comes with a 12v voltage. Electric consumption also needs to be considered because to website increase profitability, and the electric cost needs to be reduced. New miners need to consider that the miner’s power consumption will require a great amount of electric supply, which will affect the production cost. This device’s power consumption is quite low, and despite the profitability, it is an added advantage for the miners.

Power Supply of the Innosilicon A10 ETHMaster (485Mh)
Innosilicon A10 ETHMaster (485Mh) power supply kit is built using the X-adapter revision of X6B and a lite-on 1100W PSU. It has a power kit component, the input of 110V-240V. The max output of 110-120V at 900W. Max-output @200-240V at 1200W. Input connector: C13. Efficiency rating is 80 plus platinum 94%

Specifications – Buy Innosilicon A10 485 MH/S Now
Manufacturer Innosilicon
Model A10 ETHMaster (485Mh) Also known as A10 ETHKing
Release September 2018
Size 125 x 155 x 360mm
Weight 5400g
Chip name GPU/ASIC
Noise level 75db
Fan(s) 2
Power 850W
Voltage 12V
Interface Ethernet
Temperature 0 – 40 °C
Humidity 5 – 95 %

Buy Innosilicon A10 485 MH Now, order Innosilicon A10 485MH online, Innosilicon A10 485MH for sale in France, Innosilicon A10 Pro for sale

https://premiumcryptominers.com/product/innosilicon-a10-485-mh-s-ethmaster/

Leave a Reply

Your email address will not be published. Required fields are marked *